Faxing
Phaser 6121MFP Multifunction Printer
User Guide
124
4. Set the following features as desired, pressing OK after each selection:
• Lighten/Darken: Specifies the toner density level of the image or text.
• Quality Default: Specifies the resolution of the scanned image being faxed.
• Send Mode: Scan then Dial (default) or Dial then Scan.
• Header: On or Off. When On, transmission source information is included in the fax
transmission: date and time, transmitter’s name and fax number, session number, page
number, and total page number.
• Reset to Default?: When selected, resets all Send options to their original factory defaults.
See also:
Fax Send Options Setup Menu on page 156
To Next Page
Loading...
