Cleaning and Maintenance 7-7
Media Jams and Paper Pick Cleaning Procedures
Pick Roller Cleaning Methods
Tray 1 Pick Rollers
Tray 1 pick rollers can be cleaned with an alcohol moistened swab.
1. Open the front cover.
2. Rotate the roller and clean it with an alcohol-moistened swab.
3. Rotate the roller so that the flat side is facing down.
4. Close the front cover.
Note
See the jam codes in "3-Digit Jam Codes" on page 3-49.
Problem Type Solution
Paper-pick or jamming
problems tray 1.
Clean the pick roller. Follow the "Pick Roller Cleaning Methods"
on page 7-7.
Paper jamming problems
at the front door.
Clean the transport rollers.
Paper jamming problems
within the exit path.
Clean the elevator rollers.
Paper jamming problems
at the exit.
Clean the exit rollers and paper release blade.
Paper-pick or jamming
problems at the Optional
525-Sheet Feeder, Tray 3,
or Tray 4.
Clean the appropriate tray assembly feed roller.
Duplex path jam Clean the preheat, duplex, and exit rollers.
Double picks Clean the pick rollers and separator pad with alcohol. Clean
pick pad with clear packaging tape using the procedure "Pick
Roller Cleaning Methods" on page 7-7.
Paper jamming problems
at the DADF.
Clean the DADF pick roller, feed roller, and pick pad.
To Next Page
Loading...
Need help?
General