1-16 WorkCentre C2424 Service Manual
Tray and Media Specifications
The system trays accommodate most sizes and types of paper, transparencies, or other
specialty media.
â– Do not overload the paper tray. Do not load paper above the fill line on the inside
of the paper guide.
â– Adjust the paper guides to fit the paper size. For Trays 2, 3, and 4, the paper
guides click into place when they are adjusted correctly.
â– If excessive jams occur, use paper, transparencies, or other specialty media from
a new package.
â– Custom size paper can be printed only from Tray 1.
â– Xerox Professional Solid Ink Photo Paper, Xerox Professional Solid Ink Glossy
Paper, and Xerox Professional Solid Ink Trifold Brochures, can be printed from
any tray, although they exceed the recommended weight guidelines for Trays 2–
4.
â– Use Xerox Professional Solid Ink Transparencies; print quality may vary with
other transparencies.
â– When printing photos, postcards, or brochures, some attention to stacking in the
output tray may be required.
â– Use only paper envelopes. Do not use envelopes with windows, metal clasps, or
adhesives with release strips.
â– Do not print CD labels in this system.
â– When using pre-punched paper, load the paper so that the holes are on the right
side of the tray. Adjust print and copy margins to accommodate the pre-punched
holes.