6.5 Speed Control
6.5.1 Basic Settings for Speed Control
6-19
2.
Input a 0-V reference voltage from the host controller or an external circuit.
3.
Select Setup - Adjust Offset - Adjust the Speed and Torque Reference Offset from the
menu bar of the Main Window of the SigmaWin+.
4.
Click the Automatic Adjustment Tab.
5.
Click the Adjust Button.
The value that results from automatic adjustment will be displayed in the New Box.
Slight rotation
(when servo is ON)
Servomotor
SERVOPACK
Servo OFF
0-V speed reference or
0-V torque reference
Host controller
To Next Page
Loading...
