YASKAWA E-7-Series SGD7S - 9.1 Monitoring Product Information

9.1 Monitoring Product Information
9.1.1 Items That You Can Monitor
9-2
9.1 Monitoring Product Information
9.1.1 Items That You Can Monitor
9.1.2 Operating Procedures
Use the following procedure to display the product information monitor dialog box.
• Select Monitor - Read Product Information from the menu bar of the Main Window of the
SigmaWin+.
Monitor Items
Information on SERVOPACKs
• SERVOPACK model
• SERVOPACK software version
• SERVOPACK special specifications
• SERVOPACK serial number
• SERVOPACK manufacturing date
Information on Servomotors
• Servomotor model
• Servomotor serial number
• Servomotor manufacturing date
Information on Encoders
• Encoder model
• Rotary encoder resolution and linear encoder pitch resolution
• Encoder type
• Encoder software version
• Encoder serial number
• Encoder manufacturing date
Information on Option Modules
• Option Module model
• Option Module software version
• Option Module special specifications
• Option Module serial number
• Option Module manufacturing date
• With the Panel Operator, you can use Fn011 and Fn012 to monitor this information.
Refer to the following sections for the differences in the monitor items compared with the
SigmaWin+.
13.4.16 Display Servomotor Model (Fn011) on page 13-22
13.4.17 Display Software Version (Fn012) on page 13-23
• With the Digital Operator, you can use Fn011, Fn012, and Fn01E to monitor this informa-
tion.
Refer to the following manual for the differences in the monitor items compared with the
SigmaWin+.
Σ-7-Series Digital Operator Operating Manual (Manual No.: SIEP S800001 33)
Change the tab page as necessary.
Click the Serial No. Buttons to display the
serial numbers and manufacturing dates of
the Servomotor and SERVOPACK.
S
Information