YASKAWA E-7-Series SGD7S User Manual

6.15 Initializing the Vibration Detection Level
6.15.4 Related Parameters
6-96
6.15.4 Related Parameters
The following three items are given in the following table.
• Parameters Related to this Function
These are the parameters that are used or referenced when this function is executed.
• Changes during Function Execution
Not allowed: The parameter cannot be changed using the SigmaWin+ or other tool while this
function is being executed.
Allowed: The parameter can be changed using the SigmaWin+ or other tool while this func-
tion is being executed.
• Automatic Changes after Function Execution
Yes: The parameter is automatically set or adjusted after execution of this function.
No: The parameter is not automatically set or adjusted after execution of this function.
Parameter Name Setting Changes
Automatic
Changes
Pn311 Vibration Detection Sensitivity Allowed No
Pn312 Vibration Detection Level Not allowed Yes
Pn384 Vibration Detection Level Not allowed Yes

YASKAWA E-7-Series SGD7S Specifications

General

Brand	YASKAWA
Model	E-7-Series SGD7S
Category	Controller
Language	English