YASKAWA E-7-Series SGD7S - 2.3 External Dimensions

2.3 External Dimensions
2.3.1 Front Cover Dimensions and Connector Specifications
2-11
2
Selecting a SERVOPACK
2.3 External Dimensions
2.3.1 Front Cover Dimensions and Connector Specifications
The front cover dimensions and panel connector section are the same for all models. Refer to
the following figures and table.
•
Front Cover Dimensions
•
Connector Specifications
Note: The above connectors or their equivalents are used for the SERVOPACKs.
2.3.2 SERVOPACK External Dimensions
•
Three-phase, 200 VAC: SGD7S-R70A, -R90A, and -1R6A
Connec-
tor No.
Model
Number
of Pins
Manufacturer
CN1 10250-59A3MB 50 Sumitomo 3M Ltd.
CN2 3E106-0220KV 6 Sumitomo 3M Ltd.
CN3
HDR-EC14LFDTN-
SLD-PLUS
14 Honda Tsushin Kogyo Co., Ltd.
CN7 2172034-1 5 Tyco Electronics Japan G.K.
CN8 1981080-1 8 Tyco Electronics Japan G.K.
Front
cover
CN3
CN7
CN1
CN8
CN2
(16)
(120°)
(20)
S_Analog
2 × M4
160
168
8
40
(75)
140
18
(4)
168
5
25
40
Ground
terminals
2 × M4
160 ±0.5 (mounting pitch)
Exterior
10 ±0.5 (mounting pitch)
Mounting Hole Diagram
Unit: mm
Approx. mass: 0.8 kg
Two sets of terminals
S_Analog