YASKAWA GA800

Electrical Installation
3
3.3 Main Circuit Wiring
YASKAWA SIEPC71061737D GA800 Drive Technical Reference 75
Note:
The location of terminals are different for different drive models.
A - DC bus terminal
B - Connect to the drive ground terminal.
C - Ground the motor case.
D - Three-Phase motor
E - Use R/L1, S/L2, T/L3, R1/L11, S1/L21, and T1/L31
for input power supply.
F - Input protection (Fuses or Circuit Breakers)
Figure 3.4 Wiring the Main Circuit and Motor: 6-Phase/12-Pulse Drives
◆ Configuration of Main Circuit Terminal Block
Use Table 3.1 to find the correct main circuit terminal block figure for your drive.
Table 3.1 Configuration of Main Circuit Terminal Block
Model Shape of Terminal
*1
Figure
2004 - 2042, 4002 - 4023 European terminal Figure 3.5
2056, 4031, 4038 European terminal Figure 3.6
2070, 2082 European terminal Figure 3.7
4044 European terminal Figure 3.8
4060 European terminal Figure 3.9
2110 European terminal Figure 3.10
4075 European terminal Figure 3.11
4089 European terminal Figure 3.12
2138, 4103 European terminal Figure 3.13
2169, 2211, 4140, 4168 European terminal Figure 3.14
2257, 2313, 4208 to 4302 Screw terminal Figure 3.15