YASKAWA GA800

4.6 Keypad Operation
210 YASKAWA SIEPC71061737D GA800 Drive Technical Reference
5. Push or to select [ON] or [OFF], then push .
• [ON]: Backlight is always ON
• [OFF]: Backlight turns OFF after set length of time.
6. Push (Setup).
7. Push .
8. Push or to select the digit, then push or to change the value.
9. When you are done changing the value, push .
The procedure to set the backlight to turn OFF automatically is complete.
◆ Show Information about the Drive
The procedure in this section shows how to show the drive model, maximum applicable motor output (HD/ND), rated
output current (HD/ND), software version, and the serial number on the keypad.
1. Push [Home] to show the HOME screen.
Note:
• The keypad will [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on , push [Back] to show [Home] on .