5.2 European Standards
118 YASKAWA SIEPYEULA5001C LA500 Technical Manual
Three-Phase 200 V Class - Factory-Recommended Branch Circuit Protection
Drive Model
Semiconductor Protection Fuse
Rated Current
Manufacturer: EATON/Bussmann
2018 FWH-90B
2025 FWH-100B
2033 FWH-150B
Drive Model
Semiconductor Protection Fuse
Rated Current
Manufacturer: EATON/Bussmann
2047 FWH-200B
2060 FWH-200B
2075 FWH-225A
Three-Phase 400 V Class - Factory-Recommended Branch Circuit Protection
Drive Model
Semiconductor Protection Fuse
Rated Current
Manufacturer: EATON/Bussmann
4009 FWH-90B
4015 FWH-80B
4018 FWH-100B
4024 FWH-125B
Drive Model
Semiconductor Protection Fuse
Rated Current
Manufacturer: EATON/Bussmann
4031 FWH-175B
4039 FWH-200B
4045 FWH-200B
■ CE Standards Compliance for DC Power Supply Input
To comply with CE Standards, install a fuse for the DC power supply input.
Figure 5.3 shows a wiring example for a DC power supply that has two drives connected in parallel.
Figure 5.3 Wiring Example for DC Power Supply Input
WARNING! Electrical Shock Hazard. Do not ground the main circuit bus. Incorrect wiring can cause serious injury or death.
Note:
• Install a fuse for each drive when operating more than one drive. If one fuse blows, replace all fuses.
• Install the external filter (system) to comply with the EMC Directive.
Three-Phase 200 V Class - Factory-Recommended Branch Circuit Protection
Drive Model
Semiconductor Protection Fuse
Rated Current
Manufacturer: EATON/Bussmann
2018 FWH-90B
2025 FWH-100B
2033 FWH-150B
Drive Model
Semiconductor Protection Fuse
Rated Current
Manufacturer: EATON/Bussmann
2047 FWH-200B
2060 FWH-200B
2075 FWH-225A
Three-Phase 400 V Class - Factory-Recommended Branch Circuit Protection
Drive Model
Semiconductor Protection Fuse
Rated Current
Manufacturer: EATON/Bussmann
4009 FWH-90B
4015 FWH-80B
4018 FWH-100B
4024 FWH-125B
Drive Model
Semiconductor Protection Fuse
Rated Current
Manufacturer: EATON/Bussmann
4031 FWH-175B
4039 FWH-200B
4045 FWH-200B
To Next Page
Loading...
