Parameter List
11
11.3 A: Initialization Parameters
YASKAWA SIEPYEULA5001C LA500 Technical Manual 239
No.
(Hex.)
Name Description
Default
(Setting Range)
Ref.
A2-06
(010B)
User Parameter 6
Sets the parameter number to show on the sixth line in Setup Mode. You can select a
maximum of 32 parameters for the drive and set them to parameters A2-01 to A2-32.
d1-24 283
A2-07
(010C)
User Parameter 7
Sets the parameter number to show on the seventh line in Setup Mode. You can select a
maximum of 32 parameters for the drive and set them to parameters A2-01 to A2-32.
d1-25 283
A2-08
(010D)
User Parameter 8
Sets the parameter number to show on the eighth line in Setup Mode. You can select a
maximum of 32 parameters for the drive and set them to parameters A2-01 to A2-32.
d1-26 283
A2-09
(010E)
User Parameter 9
Sets the parameter number to show on the ninth line in Setup Mode. You can select a
maximum of 32 parameters for the drive and set them to parameters A2-01 to A2-32.
d1-01 283
A2-10
(010F)
User Parameter 10
Sets the parameter number to show on the 10th line in Setup Mode. You can select a
maximum of 32 parameters for the drive and set them to parameters A2-01 to A2-32.
d1-02 283
A2-11
(0110)
User Parameter 11
Sets the parameter number to show on the 11th line in Setup Mode. You can select a
maximum of 32 parameters for the drive and set them to parameters A2-01 to A2-32.
d1-03 283
A2-12
(0111)
User Parameter 12
Sets the parameter number to show on the 12th line in Setup Mode. You can select a
maximum of 32 parameters for the drive and set them to parameters A2-01 to A2-32.
d1-04 283
A2-13
(0112)
User Parameter 13
Sets the parameter number to show on the 13th line in Setup Mode. You can select a
maximum of 32 parameters for the drive and set them to parameters A2-01 to A2-32.
d1-05 283
A2-14
(0113)
User Parameter 14
Sets the parameter number to show on the 14th line in Setup Mode. You can select a
maximum of 32 parameters for the drive and set them to parameters A2-01 to A2-32.
d1-06 283
A2-15
(0114)
User Parameter 15
Sets the parameter number to show on the 15th line in Setup Mode. You can select a
maximum of 32 parameters for the drive and set them to parameters A2-01 to A2-32.
d1-07 283
A2-16
(0115)
User Parameter 16
Sets the parameter number to show on the 16th line in Setup Mode. You can select a
maximum of 32 parameters for the drive and set them to parameters A2-01 to A2-32.
d1-08 283
A2-17
(0116)
User Parameter 17
Sets the parameter number to show on the 17th line in Setup Mode. You can select a
maximum of 32 parameters for the drive and set them to parameters A2-01 to A2-32.
d1-28 283
A2-18
(0117)
User Parameter 18
Sets the parameter number to show on the 18th line in Setup Mode. You can select a
maximum of 32 parameters for the drive and set them to parameters A2-01 to A2-32.
d1-29 283
A2-19
(0118)
User Parameter 19
Sets the parameter number to show on the 19th line in Setup Mode. You can select a
maximum of 32 parameters for the drive and set them to parameters A2-01 to A2-32.
C1-01 283
A2-20
(0119)
User Parameter 20
Sets the parameter number to show on the 20th line in Setup Mode. You can select a
maximum of 32 parameters for the drive and set them to parameters A2-01 to A2-32.
C1-02 283
A2-21
(011A)
User Parameter 21
Sets the parameter number to show on the 21st line in Setup Mode. You can select a
maximum of 32 parameters for the drive and set them to parameters A2-01 to A2-32.
C2-01 283
A2-22
(011B)
User Parameter 22
Sets the parameter number to show on the 22nd line in Setup Mode. You can select a
maximum of 32 parameters for the drive and set them to parameters A2-01 to A2-32.
C2-02 283
A2-23
(011C)
User Parameter 23
Sets the parameter number to show on the 23rd line in Setup Mode. You can select a
maximum of 32 parameters for the drive and set them to parameters A2-01 to A2-32.
C2-03 283
A2-24
(011D)
User Parameter 24
Sets the parameter number to show on the 24th line in Setup Mode. You can select a
maximum of 32 parameters for the drive and set them to parameters A2-01 to A2-32.
C2-04 283
A2-25
(011E)
User Parameter 25
Sets the parameter number to show on the 25th line in Setup Mode. You can select a
maximum of 32 parameters for the drive and set them to parameters A2-01 to A2-32.
C2-05 283
A2-26
(011F)
User Parameter 26
Sets the parameter number to show on the 26th line in Setup Mode. You can select a
maximum of 32 parameters for the drive and set them to parameters A2-01 to A2-32.
E2-03 283
A2-27
(0120)
User Parameter 27
Sets the parameter number to show on the 27th line in Setup Mode. You can select a
maximum of 32 parameters for the drive and set them to parameters A2-01 to A2-32.
S1-02 283
To Next Page
Loading...
