YASKAWA LA500 - Page 240

11.3 A: Initialization Parameters
240 YASKAWA SIEPYEULA5001C LA500 Technical Manual
No.
(Hex.)
Name Description
Default
(Setting Range)
Ref.
A2-28
(0121)
User Parameter 28
Sets the parameter number to show on the 28th line in Setup Mode. You can select a
maximum of 32 parameters for the drive and set them to parameters A2-01 to A2-32.
S1-03 283
A2-29
(0122)
User Parameter 29
Sets the parameter number to show on the 29th line in Setup Mode. You can select a
maximum of 32 parameters for the drive and set them to parameters A2-01 to A2-32.
S1-06 283
A2-30
(0123)
User Parameter 30
Sets the parameter number to show on the 30th line in Setup Mode. You can select a
maximum of 32 parameters for the drive and set them to parameters A2-01 to A2-32.
S1-07 283
A2-31
(0124)
User Parameter 31
Sets the parameter number to show on the 31st line in Setup Mode. You can select a
maximum of 32 parameters for the drive and set them to parameters A2-01 to A2-32.
- 283
A2-32
(0125)
User Parameter 32
Sets the parameter number to show on the 32nd line in Setup Mode. You can select a
maximum of 32 parameters for the drive and set them to parameters A2-01 to A2-32.
- 283
A2-33
(0126)
User Parameter Auto
Selection
Sets the automatic save feature for changes to parameters A2-17 to A2-32 [User
Parameters 17 to 32].
0 : Disabled: Manual Entry Required
1 : Enabled: Auto Save Recent Parms
1
(0, 1)
283
V/f
OLV
V/f
OLV
V/f
OLV
V/f
OLV
V/f
OLV
V/f
OLV