Yealink VS800 - Page 118

| Configuring Basic Settings | 118
Parameter Description Configuration Method
Auto recording
Enable or disable the system to start recording
automatically once a call is established.
• On- the system starts recording
automatically once a call is established.
• Off- the system does not start recording
automatically once a call is established.
Note: the default value is Off. Only the
Recording feature is enabled can this feature
be available.
Web user interface
Auto Stop
Recording
Enable or disable the system to stop recording
automatically once a call is established.
• On- the system stops recording
automatically once a call is established.
• Off- the system does not stop recording
automatically once a call is established.
Default: On. It is not applicable to VP59.
Web user interface
Recording
Notification
Enable or disable the system to show
recording icon and recording prompt.
• On- the recording icon and the duration
are displayed on the system screen.
• Off- the recording icon and the duration
are not displayed on the system screen.
Default: On.
Web user interface
WPP20 Recording
Confirm
Enable or disable the system to allow the
action that you use WPP20 to record.
Default: On. It is only applicable to VC200/
VC500/VC800/VC880/VP59.
Web user interface
Dual Screen
Recording
Select the desired screen. You can record the
video on the selected screen when you are
using dual screen.
• Screen 1+2: record video on dual screen
• Screen 1 Only
• Screen 2 Only
Default: Screen 1+2.
It is not applicable VC200/VP59.
Web user interface
Related tasks
Configuring USB Storage
Configuring Local Storage