Yealink VS800 - Configuring Network Settings; IPv4 and IPv6 Network Settings

| Configuring Network Settings | 52
Multipoint License Type Maximum Connections Description
VC880/VC800 with a 8-way
multipoint license
8-way video call with a
presentation and 5-way voice call
(a conference moderator and 13
participants).
VC880/VC800 with a 16-way
multipoint license
16-way video call with a
presentation and 5-way call (a
conference moderator and 21
participants).
VC880/VC800 with a 24-way
multipoint license
24-way video call with a
presentation (a conference
moderator and 24 participants)
Period of validity: eternal.
One unique worldwide license
for every VC880/VC800, which
cannot be used by other devices.
You can purchase the license from
the Yealink by providing the MAC
address of your VC880/VC800.
•
Importing Multipoint Licenses
Importing Multipoint Licenses
Procedure
1.
On your web user interface, go to Security > License.
2.
Click Browse and select a multipoint license (the file format must be *.dat) from your local system.
3.
Click Upload to import the multipoint license.
Related tasks
Viewing Multipoint License Status
Configuring Network Settings
The following introduces how to configure network settings.
•
IPv4 and IPv6 Network Settings
•
DHCP Options
•
VLAN
•
Wi-Fi
•
Wireless Access Point
•
802.1x Authentication
•
Network Speed and Duplex Mode
•
Restricting Reserved Ports
•
Quality of Service (QoS)
•
Configuring MTU
IPv4 and IPv6 Network Settings
Yealink video conferencing system support IPv4 addressing mode, IPv6 addressing mode, as well as the IPv4&IPv6
dual stack-addressing mode.
Note:
Yealink video conferencing systems comply with the DHCPv4 specifications documented in RFC 2131, and
the DHCPv6 specifications documented in RFC 3315.