| Configuring Camera Settings | 145
Configuring Content Sharing
You can specify the mode, the maximum frame and the resolution for the shared content. Make sure that the definition
of the presentation is good.
Procedure
1.
On your web user interface, go to Setting > Video & Audio > Content Sharing.
2.
Configure and save the following settings:
Parameter Description Configuration Method
Content Sharing (it is not
applicable to VP59)
Configure the content sharing
mode.
• Sharing Document- select
this mode to save bandwidth
when you are sharing a
document.
• Sharing Video- select this
mode to play video fluently
when you are sharing a
video.
Default: Sharing Document.
Web user interface
Frame
Configure the maximum frame
rate when the content is sharing.
• 5fps
• 15fps
• 30fps
Default: 15fps.
Web user interface
Resolution
Configure the maximum frame
rate when the content is sharing.
• 1080P
• 720P
Default: 1080P.
Web user interface
Automatic Content Sharing
(it is only applicable to VC200/
VC500/VC800/VC880)
Configure whether to enable PC
presentation on the system when
the content is sharing.
Default: On.
Web user interface
Configuring Camera Settings
You can configure the following settings on VC880/VC800/VC500/VC200/PVT980/PVT950.
•
Selecting and Setting Cameras
•
Viewing Camera Status
To Next Page
Loading...
