Yealink VS800 - Selecting Video Frame Rate and Resolution

| Configuring Video Settings | 138
Parameter Description Configuration Method
Output For Display 2
Specify the content to be
displayed on the secondary
monitor.
• Auto—The secondary
monitor displays the content
in this priority: PC>VC880/
VC800/VC500/PVT980/
PVT950 Camera>Camera N.
• PC—The secondary monitor
displays the PC content.
• VC880/VC800/VC500/
PVT980/PVT950 Camera
—The secondary monitor
displays the video images
from the local camera.
• Camera N—The secondary
monitor displays the video
images from the connected
camera N.
Note: the default value is Auto.
After you specify “Output for
Display 2”, you can still modify
the content to be displayed
on the secondary monitor
temporarily during a call by
using the “Focus” feature. But
the next time you establish a
call, the content to be displayed
on the secondary monitor is
controlled by the “Output For
Display 2” .
Web user interface
Selecting Video Frame Rate and Resolution
To transfer a clear and smooth video, you can specify the maximum frame and resolution for local video according to
the network environment.
Procedure
1.
On your web user interface, go to Setting > Video & Audio > Main.
2.
Configure and save the following settings:
Parameter Description Configuration Method
Enable 60fps
Enable or disable 60fps for a
video call.
Note: the default value is On. It
is not applicable VC200/VPP59.
Web user interface