| Configuring Basic Settings | 98
The dialing screen of your web user interface and the monitor will appear the configured VMR. You can select the
desired VMR from the pull-down menu, and then enter the conference ID to call the corresponding VMR.
Configuring Basic Settings
•
Setting the Site Name
•
Setting the Language
•
Enabling/Disabling the Clock
•
Setting the Ring Tone
•
Configuring Key Tone
•
Setting Time and Date
•
Configuring Automatic Sleep Time
•
Allowing Website Snapshot
•
Adjusting Backlight of the CP960 Conference Phone
•
Screen Saver
•
Customizing the Local Interface
•
Muting the Microphone
•
Configuring the Keyboard Input Method
•
Configuring USB Storage
•
Configuring Local Storage
•
Taking Screenshots by Remote Control
•
Configuring Video Recording
Setting the Site Name
You can customize the site name.
Procedure
1.
Do one of the following:
• On your web user interface, go to Setting > General > General Information > Site Name.
• On your VCS, go to More > Setting > Basic > Site Name.
On your VP59, tap Setting > Basic > Site Name.
• On your CTP20, tap Setting > Basic > Site Name.
2.
Configure and save the following settings:
Parameter Description Configuration Method
Site Name
Configure the site name of the
system.
Note: you can enter 64
characters at most.
Web user interface
Endpoint
CTP20
To Next Page
Loading...
