| Getting Started | 23
Rear Panel of VCC22 Video Conferencing Camera
Port Name Description
①
HDMI Out Connect to a monitor for displaying shared content.
②
Camera Port Connect to a PoE switch.
③
Reset Key Reset the camera to factory defaults.
④
Security Slot Allow you to connect a universal security cable to VCC22, so you can lock it down.
The camera cannot be removed when locked.
Hardware of VCH50 Video Conferencing Hub
You can connect VCH50 to the computer for presenting. If you want to connect a PC to your system using Ethernet
cable, you need to connect the VCH50 video conferencing hub to your system. Connecting VCH50 to the computer
for presenting is not applicable to VP59.
•
Left Side of VCH50 Cable Hub
•
Right Side of VCH50 Cable Hub
•
Rear Panel of VCH50 Cable Hub
Left Side of VCH50 Cable Hub
Port Name Description
①
Codec Connect to the video conferencing
system via the provided 7.5m
network cable.
To Next Page
Loading...
