| Configuring Video Settings | 137
Configuring Change Layout by Content Sharing
The feature of Change Layout by Content Sharing is enabled by default. When you are presenting on the PC, the
layout in the device (except for VP59) is changed into 1+N or voice-activated mode automatically, and the content is
enlarged and displayed in the screen. This feature is only applicable to VC200/VC500/VC800/VC880/VP59.
Procedure
1.
On your web user interface, go to Setting > Call Features > Layout.
On your VP59, tap Setting > Call Features.
2.
Enable or disable Change Layout by Content Sharing.
Related information
Configuring Content Sharing
Specifying Content to the Secondary Screen
When you connect dual display screen, you can specify the content to be displayed on the secondary monitor. This
feature is not applicable VC200/VP59.
Procedure
1.
On your web user interface, go to Setting > Video & Audio > Output For Display 2.
2.
Configure and save the following settings:
To Next Page
Loading...
