Yealink VS800 - Configuring Manual Exposure Mode

| Configuring Camera Settings | 150
Parameter Description Configuration Method
Metering
Configure the value of metering.
• Average
• Central
• Bottom
• Top
Default: Average.
Web user interface
Endpoint
CTP20
Configuring Manual Exposure Mode
Procedure
1.
Do one of the following:
• On your web user interface, go to Setting > Camera > Exposure.
• On your VCS:
For VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Camera > Exposure.
On your VC200, go to More > Setting > Video & Audio > Exposure.
• On your CTP20, tap Setting > Camera > Exposure.
2.
Select Manual as the Exposure Mode.
3.
Configure and save the following settings:
Parameter Description Configuration Method
Aperture
Configure the value of aperture.
• Off
• F1.6, F2.0, F2.4, F2.8, F3.4, F4, F4.8,
F5.6, F6.8, F8, F9.6, F11, F14
Default: F3.4.
Web user interface
Endpoint
CTP20
Shutter
Configure the value of the shutter.
Value: 1/60, 1/90, 1/100, 1/125, 1/180,
1/250, 1/350, 1/500, 1/725 1/1000, 1/1500,
1/2000, 1/3000, 1/4000, 1/6000, 1/10000
Default: 1/100.
Web user interface
Endpoint
CTP20
Gain
Specify the value.
Valid value: 1 - 15. Default: 2.
Web user interface
Endpoint
CTP20