Yealink VS800 - Importing a Local Contact List

| Managing the Directory | 180
Procedure
1.
Do one of the following:
• If you import the multipoint license to the device, on your web user interface, go to Directory > Local
Directory.
Select the checkboxes of desired local contacts, click New Contact > Conf.
• On your VCS, go to Dial > Directory.
Select Conference Contacts from the drop-down menu.
Select New Conference.
•
On your CTP20, tap Dial > , and select Add Conference Contact from pop-up dialog.
2.
Enter the conference name.
3.
Save the change.
Note:
The number of local contacts that you can add to a conference contact depends on the imported multipoint
license.
For example, if you import a 24-way license to your VC880/VC800, up to 24 local contacts can be added
to a conference contact. For more information the MCU certificate, contact the system administrator.
Related tasks
Viewing Multipoint License Status
Importing a Local Contact List
You can upload a local contact list to your system to add multiple contacts at a time. The system supports the XML
and CSV format contact lists.
Procedure
1.
On your web user interface, go to Directory > Local Directory.
2.
Click Import.
3.
Click the import box, and upload the contact file from your computer.
4.
Click Import.
5.
If you import a CSV format contact list, Configure and save the following settings:
Parameter Description Configuration Method
The first line as the title
It will prevent importing the title
of the local contact information
which is located in the first line
of the CSV file.
• Check—do not import the
first line of the CSV file.
• Uncheck—import the first
line of the CSV file.
Web user interface