| Configuring the Audio Settings | 120
• On your VCS:
For VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Video & Audio > Audio Settings >
Audio Output.
On your VC200, go to More > Setting > Video & Audio > Audio Settings > Audio Output.
On your VP59, tap Setting > Audio > Extended Audio Output.
• On your CTP20, tap Setting > Audio > Audio Output.
2.
Configure and save the following settings:
Parameter Description Configuration Method
Audio Output
Specify the audio output for the
system.
The supported types are as
follows:
• Auto- selects the audio
output device with the
highest priority.
• VCS Phone - selects
the CP960 conference
phone. (This feature is not
applicable to VP59)
• HDMI - selects the built-in
speakerphone of the monitor.
If you connect two monitors
to your system, only the
HDMI 1 port is available for
audio output.
• Line Output –the
speakerphone connected
to VC880/VC800/VC200/
PVT980 codec.
• USB to Line output -
the audio output device
connected to the USB port on
the VC500/PVT950 codec
via a USB to Line output
adapter.
Note: the default value is Auto.
If VCS Phone is set as the audio
output device manually or
automatically, the audio input
device must be VCS Phone.
Web user interface
Endpoint
CTP20
Note:
The system will start EQ self-adaption to optimize the acoustic effect automatically when the audio output
switches to HDMI or Line Output/USB to Line out.
Related information
EQ Self-Adaption
To Next Page
Loading...
