Zebra DS457

Standard Default Parameters A - 5
Event Reporting
Decode Event 256 F0h 00h Disable 8-18
Boot Up Event 258 F0h 02h Disable 8-19
Parameter Event 259 F0h 03h Disable 8-19
Serial Host Parameters
Serial Host Types N/A N/A Standard RS-232 9-5
Baud Rate N/A N/A 9600 9-7
Parity Type N/A N/A None 9-9
Data Bits N/A N/A 8-Bit 9-9
Check Receive Errors N/A N/A Enable 9-10
Hardware Handshaking N/A N/A None 9-11
Software Handshaking N/A N/A None 9-13
Host Serial Response Time-out N/A N/A 2 Sec 9-15
RTS Line State N/A N/A Low RTS 9-16
Beep on <BEL> N/A N/A Disable 9-16
Intercharacter Delay N/A N/A 0 msec 9-17
Nixdorf Beep/LED Options N/A N/A Normal Operation 9-18
Ignore Unknown Characters N/A N/A Send Bar Code 9-18
USB Host Parameters
USB Device Type N/A N/A USB HID Keyboard 10-3
Symbol Native API (SNAPI) Status
Handshaking
N/A N/A Enable 10-5
USB Country Keyboard Types (Country
Codes)
N/A N/A North American 10-6
USB Keystroke Delay N/A N/A No Delay 10-8
USB CAPS Lock Override N/A N/A Disable 10-8
USB Ignore Unknown Characters N/A N/A Enable 10-9
Emulate Keypad N/A N/A Disable 10-9
Emulate Keypad with Leading Zero N/A N/A Disable 10-10
Quick Keypad Emulation N/A N/A Disable 10-10
Table A-1 Standard Default Parameters Table (Continued)
Parameter
Parameter
Number
SSI Number Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.