Zebra MC3300X User Manual

Accessories
113
Battery Compatibility
• MC3300x-G is compatible with the 7000mAh extended capacity & 5200mAh high capacity
PowerPercision+ batteries.
• MC3300x-R/S is compatible with the 7000mAh extended capacity, 5200mAh high capacity &
2740mAh standard capacity PowerPrecision+ batteries.
• MC3300x devices are not compatible with the legacy MC32N0 PowerPrecision batteries.
The following re-occurring message will be displayed if the incorrect battery is used with the MC3300x
device. Please make sure you use one of the MC33XX compatible batteries.
NOTE:
The battery notification (shown above) cannot be disabled or suppressed on the MC3300x handheld device.
Please make sure you use the appropriate MC33 PP+ batteries with the MC3300x device.
Battery Charging
Main Battery Charging
The device’s Charging/Notification LED indicates the status of the battery charging in the device.
The MC3300x 7000 mAh PowerPrecision+ extended battery charges from 0% to 90% in less than 5.2
hours at room temperature.
The MC33XX 5200 mAh PowerPrecision+ high capacity battery charges from 0% to 90% in less than 3.8
hours at room temperature.
The MC33XX 2740 mAh PowerPrecision+ standard battery charges from 0% to 90% in less than 2.2 hours
at room temperature.
Spare Battery Charging
The spare battery charging LED on the cradle indicates the status of the spare battery charging in the
cradle.
mc33-ug-en.book Page 113 Thursday, July 9, 2020 10:34 AM

Zebra MC3300X Specifications

General

Storage	32 GB
Operating Temperature	-4°F to 122°F/-20°C to 50°C
Processor	Qualcomm Snapdragon™ 660 octa-core, 2.2 GHz
Operating System	Android 11
RAM	4 GB
Display Size	4.0 inches
Display Resolution	480 x 800 pixels
Connectivity	Wi-Fi, Bluetooth
Camera	13 MP rear
Drop Specification	Multiple 6 ft./1.8 m drops to concrete across the operating temperature range
Sealing	IP65
Touch Panel	Capacitive
Scanning	1D/2D barcode scanning
Battery Type	Li-Ion