Zebra MC3300X User Manual

Accessories
138
USB Charge Cable
The USB Charge Cable:
• Provides 5 VDC power to charge the battery.
• Provides power and/or communication with the host computer over USB to the device.
• Compatible with devices using the following batteries:
• MC3300x 7000 mAh PowerPrecision+ extended capacity battery
• MC33XX 5200 mAh PowerPrecision+ high capacity battery
• MC33XX 2740 mAh PowerPrecision+ standard capacity battery (MC3300x-R/S &
MC33XX-R/S only)
The USB Charge Cable snaps onto the bottom of the MC3300x and removes easily when not in use.
When attached to the MC3300x allows charging only.
Figure 63 USB Charge Cable
Connecting the USB Charge Cable to Device
NOTE: To function properly, remove the entire rubber boot from the device before placing the device in a
charging cradle. To function properly, ensure that the MC3300x hand strap, if attached, does not interfere
with the charging contacts when the MC3300x is inserted into a charging cradle or cable.
To connect the USB Charge Cable to the device, insert the USB Charge Cable straight onto the device
until the device touches the bottom of the cable cup.
mc33-ug-en.book Page 138 Thursday, July 9, 2020 10:34 AM

Zebra MC3300X Specifications

General

Storage	32 GB
Operating Temperature	-4°F to 122°F/-20°C to 50°C
Processor	Qualcomm Snapdragon™ 660 octa-core, 2.2 GHz
Operating System	Android 11
RAM	4 GB
Display Size	4.0 inches
Display Resolution	480 x 800 pixels
Connectivity	Wi-Fi, Bluetooth
Camera	13 MP rear
Drop Specification	Multiple 6 ft./1.8 m drops to concrete across the operating temperature range
Sealing	IP65
Touch Panel	Capacitive
Scanning	1D/2D barcode scanning
Battery Type	Li-Ion