Zebra MC3300X User Manual

Accessories
129
Setup
Figure 57 5-Slot Ethernet ShareCradle with 4-Slot Battery Charger Setup
Charging the MC3300x Battery
NOTE: To function properly, remove the entire rubber boot from the device before placing the device in a
charging cradle.
To function properly, ensure that the MC3300x hand strap, if attached, does not interfere with the
charging contacts when the MC3300x is inserted into a charging cradle.
1.
Ensure that the cradle is connected to power.
2. Slide the mobile computer into the slot in the cradle. The mobile computer amber Charge LED
Indicator, indicates the mobile computer battery charging status.
3. Gently press down on the device to ensure proper contact.
4. When charging is complete, remove the mobile computer from the cradle slot.
Charging Spare Batteries
Insert the battery into the charger and gently press down on the battery to ensure proper contact.
Battery Charging in the 5-Slot Ethernet ShareCradle with 4-Slot Battery
Charger
The MC3300x’s Charge LED or the spare battery LED indicates the status of the battery charging in the
MC3300x.
AC Line Cord
DC Line Cord
Power Supply
Primary Port
Ethernet Cable
Router
mc33-ug-en.book Page 129 Thursday, July 9, 2020 10:34 AM

Zebra MC3300X Specifications

General

Storage	32 GB
Operating Temperature	-4°F to 122°F/-20°C to 50°C
Processor	Qualcomm Snapdragon™ 660 octa-core, 2.2 GHz
Operating System	Android 11
RAM	4 GB
Display Size	4.0 inches
Display Resolution	480 x 800 pixels
Connectivity	Wi-Fi, Bluetooth
Camera	13 MP rear
Drop Specification	Multiple 6 ft./1.8 m drops to concrete across the operating temperature range
Sealing	IP65
Touch Panel	Capacitive
Scanning	1D/2D barcode scanning
Battery Type	Li-Ion