Zebra MC3300X User Manual

Getting Started
28
Installing the MC3300x-R/S Battery
The MC3300x-R/S is compatible with the following batteries:
• MC3300x 7000 mAh PowerPrecision+ extended battery
• MC33XX 5200 mAh PowerPrecision+ high capacity battery
• MC33XX 2740 mAh PowerPrecision+ standard battery
To install the battery:
1. Loosen the hand strap, if needed.
2. Align the top of the battery into the battery compartment.
3. Slide the front of the battery into the battery compartment.
4. Press battery down firmly. Ensure that both battery release buttons on the sides of the MC3300x-R/S
return to the home position.
5. Tighten the hand strap, if needed.
6. Press and hold the Power key (until you see a Zebra splash screen) to turn on the device.
mc33-ug-en.book Page 28 Thursday, July 9, 2020 10:34 AM

Zebra MC3300X Specifications

General

Storage	32 GB
Operating Temperature	-4°F to 122°F/-20°C to 50°C
Processor	Qualcomm Snapdragon™ 660 octa-core, 2.2 GHz
Operating System	Android 11
RAM	4 GB
Display Size	4.0 inches
Display Resolution	480 x 800 pixels
Connectivity	Wi-Fi, Bluetooth
Camera	13 MP rear
Drop Specification	Multiple 6 ft./1.8 m drops to concrete across the operating temperature range
Sealing	IP65
Touch Panel	Capacitive
Scanning	1D/2D barcode scanning
Battery Type	Li-Ion