Zebra MC3300X User Manual

72
Data Capture
The device supports data capture using:
• Internal Laser Scanner (SE965 1D)
• Imager (SE4720 1D/2D, SE4770 1D/2D, and SE4850-ER 1D/2D)
• RS5100 Bluetooth Ring Scanner
• RS6000 Bluetooth Ring Scanner
• RS507/RS507X Bluetooth Hands-free imager
• DS2278 Digital Barcode Scanner
• DS3678 Digital Barcode Scanner
• LI3678 Linear Scanner.
Laser Scanner
The device with a laser scanner has the following features:
• Reading of a variety of barcode symbologies, including the most popular linear, postal, and 1D code
types.
• Intuitive laser aiming for easy point-and-shoot operation.
Integrated Imager
The device with an integrated 2D imager has the following features:
• Omnidirectional reading of a variety of barcode symbologies, including the most popular linear, postal,
PDF417, Digimarc, and 2D matrix code types.
• Advanced intuitive laser aiming cross-hair and dot aiming for easy point-and-shoot operation.
The imager uses imaging technology to take a picture of a barcode, stores the resulting image in memory,
and executes state-of-the-art software decoding algorithms to extract the barcode data from the image.
Operational Modes
The device with an integrated imager supports two modes of operation, listed below. Activate each mode
by pressing the Scan button.
• Decode mode - The device attempts to locate and decode enabled barcodes within its field of view. The
imager remains in this mode as long as you hold the scan button, or until it decodes a barcode.
mc33-ug-en.book Page 72 Thursday, July 9, 2020 10:34 AM

Zebra MC3300X Specifications

General

Brand	Zebra
Model	MC3300X
Category	PDA
Language	English