Zebra MC3300X User Manual

Accessories
156
Un-powered Forklift Mount
The Un-powered Forklift Mount allows the user to place the MC3300x in a holder while installed on a
forklift. However, it does not provide charging or communication to the terminal. The Forklift Mount can be
installed on a square surface or roll bar of a forklift and supports portrait (vertical) orientation.
Figure 69 Forklift Mount
To use the MC3300x in the forklift mount holder:
1. Insert the MC3300x into the Forklift Mount Holder in an upright position.
mc33-ug-en.book Page 156 Thursday, July 9, 2020 10:34 AM

Zebra MC3300X Specifications

General

Storage	32 GB
Operating Temperature	-4°F to 122°F/-20°C to 50°C
Processor	Qualcomm Snapdragon™ 660 octa-core, 2.2 GHz
Operating System	Android 11
RAM	4 GB
Display Size	4.0 inches
Display Resolution	480 x 800 pixels
Connectivity	Wi-Fi, Bluetooth
Camera	13 MP rear
Drop Specification	Multiple 6 ft./1.8 m drops to concrete across the operating temperature range
Sealing	IP65
Touch Panel	Capacitive
Scanning	1D/2D barcode scanning
Battery Type	Li-Ion