Zebra MC3300X User Manual

Accessories
127
Setup
Figure 55 5-Slot ShareCradle with 4-Slot Battery Charger Setup
Charging the MC3300x Battery
NOTE: To function properly, remove the entire rubber boot from the device before placing the device in a
charging cradle.
To function properly, ensure that the MC3300x hand strap, if attached, does not interfere with the
charging contacts when the MC3300x is inserted into a charging cradle.
1.
Ensure that the cradle is connected to power.
2. Slide the mobile computer into the slot in the cradle. The mobile computer amber Charge LED
Indicator, indicates the mobile computer battery charging status.
3. Gently press down on the device to ensure proper contact.
4. When charging is complete, remove the mobile computer from the cradle slot.
Charging Spare Batteries
Insert the battery into the charger and gently press down on the battery to ensure proper contact.
Battery Charging in the 5-Slot ShareCradle with 4-Slot Battery Charger
The MC3300x’s Charge LED or the spare battery LED indicates the status of the battery charging in the
MC3300x.
AC Line Cord
DC Line Cord
Power Supply
mc33-ug-en.book Page 127 Thursday, July 9, 2020 10:34 AM

Zebra MC3300X Specifications

General

Brand	Zebra
Model	MC3300X
Category	PDA
Language	English