Zebra MC3300X User Manual

Accessories
142
MC33XX Charge Only Adapter
Use the MC33XX Charge Only Adapter for backwards compatibility with the MC32N0 cradles and the
MC33XX or MC3300x mobile computer. The MC33XX Charge Only Adapter is compatible with both the
MC33XX and the MC3300x mobile computers for charge only (no communication) on the legacy MC32N0
1-Slot and 4-Slot cradles.
• MC33XX Charge Only Adapter supports the MC32N0 1-Slot USB Cradle, MC32N0 4-Slot Charge Only
Cradle, and MC32N0 4-Slot Ethernet Cradle.
• MC33XX Charge Only Adapter provides charge only; no communication when used with the MC32N0
cradles.
• MC32N0 1-Slot USB Cradle provides 5.4 VDC to charge the device.
• MC32N0 1-Slot USB Cradle (with the MC33XX Charge Only Adapter) is compatible with an MC33XX or
MC3300x mobile computer charging either MC33XX or MC3300x PowerPrecision+ batteries or
MC32N0 PowerPrecision batteries, but the MC32N0 1-Slot USB Cradle spare battery slot is only
compatible with MC32N0 PowerPrecision batteries.
MC33XX Charge Only Adapter Installation
To install the MC33XX Charge Only Adapter into the MC32N0 Cradle:
1. Clean the MC32N0 cradle and contacts with an alcohol wipe, using a back and forth motion with your
finger. For more information about cleaning, see Maintenance and Troubleshooting.
2. Peel and remove the adhesive from the back of the adapter.
mc33-ug-en.book Page 142 Thursday, July 9, 2020 10:34 AM

Zebra MC3300X Specifications

General

Brand	Zebra
Model	MC3300X
Category	PDA
Language	English