Zebra MC3300X User Manual

Data Capture
85
Figure 35 Barcode Scanning with DS2278
4. Press and hold the trigger.
5. Ensure the aiming pattern covers the barcode.
Figure 36 DS2278 Aiming Pattern
6. Upon successful decode, the scanner beeps and the LED flashes, and the scan line turns off.
7. The captured data appears in the text field.
Pairing the Bluetooth Ring Scanner
To connect the RS5100/RS6000/RS507/RS507X Bluetooth Ring Scanner to the device, use one of the
following methods:
• Near Field Communication (NFC) (RS5100 or RS6000 only)
• Simple Serial Interface (SSI)
• Bluetooth Human Interface Device (HID) Mode.
Pairing Using Near Field Communication
The device provides the ability to pair the RS5100 or RS6000 using NFC.
1. Ensure that the RS5100 or RS6000 is in SSI mode. Refer to the RS5100 or RS6000 User Guide or
Product Reference Guide for more information.
2. Ensure that NFC is enabled on the device.
mc33-ug-en.book Page 85 Thursday, July 9, 2020 10:34 AM

Zebra MC3300X Specifications

General

Brand	Zebra
Model	MC3300X
Category	PDA
Language	English