Getting Started
25
Setting Up the Device
To start using the device for the first time:
• Install a micro secure digital (SD) card (optional)
• Install the battery
• Charge the device
• Power on the device.
Installing a microSD Card
The microSD card slot provides secondary non-volatile storage. The slot is located under the battery pack.
Refer to the documentation provided with the card for more information, and follow the manufacturer’s
recommendations for use.
CAUTION: Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card.
Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring that the
operator is properly grounded.
1. Using a coin or finger, remove the microSD card cover.
Table 7 MC3300x-S Features - Back View
Number Item Function
9 Battery Provides power for operating the device.
10 Battery Release
Latch
Release the battery from the device.
11 Side Key Scan
Button
Initiates data capture when a scan application is enabled.
12 Speaker Provides audio output for video and music playback.
13 Scanner Exit
Window
Provides data capture using the scanner.
14 NFC Antenna Provides communication with other NFC-enabled devices.
15 Camera/Flash Provides image capture capability with LED illumination.
16 Hand Strap Use for securely holding the device. Comes pre-installed on every
MC3300x-S & MC3300x-R device.
mc33-ug-en.book Page 25 Thursday, July 9, 2020 10:34 AM
To Next Page
Loading...