Zebra MC3300X User Manual

Accessories
140
NOTE: Charging using a host computer USB port could take longer.
To achieve the best charging results use only Zebra charging accessories and batteries. Charge batteries
at room temperature with the MC3300x in sleep mode.
Charging the Device
To charge the device using the USB Charge Cable:
1. Connect the USB Charge Cable to the MC3300x.
2. Connect the USB connector of the power supply.
3. Plug the power supply into a power outlet.
Main Battery Charging
The device’s Charging/Notification LED indicates the status of the battery charging in the device.
NOTE: In many cases the 90% charge provides plenty of charge for daily use.
To achieve the best charging results use only Zebra charging accessories and batteries. Charge batteries
at room temperature with the MC3300x in sleep mode.
The MC3300x 7000 mAh PowerPrecision+ extended battery charges from 0% to 90% in less than 5 hours
at room temperature.
Disconnecting the USB Charge Cable
To disconnect the USB Charge Cable from the MC3300x:
1. Grasp the cable cup in one hand (by pinching the front and back) and the device in the other hand.
mc33-ug-en.book Page 140 Thursday, July 9, 2020 10:34 AM

Zebra MC3300X Specifications

General

Brand	Zebra
Model	MC3300X
Category	PDA
Language	English