Zebra MC3300X User Manual

Getting Started
33
3.
Align the battery into the battery compartment.
4. Slide the front of the battery into the battery compartment.
5. Press battery down firmly. Ensure that both battery release buttons on the sides of the MC3300x-G
return to the home position.
6. The device automatically resumes after a battery removal and installation (in a hot swap change). The
only time the Power key needs to be pressed is if the device has been powered off or left for a
prolonged duration without a battery pack.
Replacing the Battery in the MC3300x-R/S
To replace the battery:
1. Push in the two Battery Release buttons.
The battery ejects slightly. With Hot Swap mode, when the user removes the battery, the display turns
off and the device enters low power state. The MC3300x-R/S supports wireless connectivity
persistence for 30 sec (indicated by flashing Amber LEDs), followed by RAM data persistence for
approximately five minutes. Replace the battery within five minutes to preserve memory persistence.
mc33-ug-en.book Page 33 Thursday, July 9, 2020 10:34 AM

Zebra MC3300X Specifications

General

Brand	Zebra
Model	MC3300X
Category	PDA
Language	English