Getting Started
35
3.
Align the battery into the battery compartment.
4. Slide the front of the battery into the battery compartment.
5. Press battery down firmly. Ensure that both battery release buttons on the sides of the MC3300x-R/S
return to the home position.
6. The device automatically resumes after a battery removal and installation (in a hot swap change). The
only time the Power key needs to be pressed is if the device has been powered off or left for a
prolonged duration without a battery pack.
mc33-ug-en.book Page 35 Thursday, July 9, 2020 10:34 AM
To Next Page
Loading...
Need help?
General
