Zeiss Axio Imager 2 - Page 19

Axio Imager 2 INSTRUMENT DESCRIPTION ZEISS
Equipment and compatibility table
01/2016 430000-7544-001 19
Component Option / comment
Stand
A2
LED
A2 M2p M2 D2 Z2 A2m M2m D2m Z2m
Reflected-light aperture
diaphragm slider
manual O O O O O O O O O O
motorized - - - - - O - O - O
Reflected light double filter
wheel
manual O O O O O O O O O O
motorized - - - - - O - O - O
FL Attenuator
manual
O O O O O O O O O O
motorized - - - - - O - O - O
Reflected light /
transmitted light selection
manual
+ + - - + - + - + -
Software - - + + - + - + - +
Mixed light
with extra power supply
external power supply
+ + - - + - + - + -
external power supply,
CAN
- - + + - + - + - +
Focus (z-axis)
manual
+ + - - + - + - + -
motorized, 25 nm - - + + - - - + - -
High-performance focus
(motorized, 10 nm)
- - - - - + - - - +
Focus linear sensor - O O O O O
Auto Focus - / 6) O O O O O
TFT display - - - O + - + - + - +
ApoTome - O O O O O O O O O O
Power supply
External
- - + + - + - + - +
Internal + + - - + - + - + -
Mechanical CAN stages motorized**** O O O O O O O O O O
Scanning stages
Piezo
O O O O O O O O O O
DC / stepper motors O O O O O O O O O O
Fast z-piezo operation
With manual stage
O O O O O O O O O O
With scanning stage O O O O O O O O O O
Motorized 2TV tube - - - O O - O - O - O
Condensers
manual
O O O O O O O O O O
motorized - - O O - O - O - O
+ = Included in stand
O = Optional
- = Not possible
* = Motorized (6-position and 10-position) reflector turret may be used.
** = ACR function not available with Axio Imager D2 and D2m.
*** = All reflected-light illumination systems come with a motorized shutter.
For fluorescence applications, this may be replaced optionally by a high-speed shutter.
**** = USB/CAN converter 432909 is required for use on Axio Imager A2 LED, A2, A2m, D2 and D2m.
***** = Motorized only if used with an objective nosepiece.
6) = Sideways camera path deflection is used, analyzer slider plane cannot be used for slider.