Axio Imager 2 OPERATION ZEISS
Operating the motorized microscope via the touchscreen of the TFT display
01/2016 430000-7544-001 145
4.8.7 User page
The user can access three other pages from this
one:
− User selection
− User configuration
− Admin
4.8.7.1 User selection page
The User selection page contains a tab for
selecting a previously created and configured user.
A default user may also be chosen. This user
contains the standard assignment of the buttons
located on the instrument and the docking station,
based on an automatic assignment plan. Hardware
settings may be assigned. These are retained after
switch-off. Light manager values will be saved.
Fig. 168 Microscope -> User -> User selection
To Next Page
Loading...
