Zeiss Axio Imager 2 - Spares, Consumables and Tools

ZEISS CARE, MAINTENANCE, TROUBLESHOOTING AND SERVICE Axio Imager 2
Spares, consumables and tools
202 430000-7544-001 01/2016
5.4 Spares, consumables and tools
Designation Cat. No. Designated use
12V 100W halogen lamp 380059-1660-000 For HAL 100 illuminator
HBO 103 W/2 mercury vapor short-arc
lamp
380301-9350-000 For HBO 100 illuminator
SW 1.5 ball-headed screwdriver * 000000-0460-470 For changing condensers and stages
AF 3 ball-headed screwdriver * 000000-0069-551 For changing tubes and illuminators
SW 4 offset screwdriver * 000000-0015-278 For removing the carrying handle
Eyepiece eyecup 444801-0000-000 Recommended for suppressing
reflections in low-light techniques
Dust cap for nosepiece
Dust cap for eyepiece sockets
462981-0000-000
000000-0168-373
For sealing instrument openings not in
use
Immersion medium Immersol 518 F

;
Oiler, 20 ml
Bottle, 100 ml
Bottle, 250 ml
444960-0000-000
444962-0000-000
444963-0000-000
For oil immersion applications
n
D
= 1.518
Cleaning tissue, 300 sheets 462975-0000-000 For cleaning optical surfaces
G-fuse inserts (5 x 20 mm);
T 5.0 A/H / 250 V; 2x (Stand, manual)
G-fuse inserts (5 x 20 mm);
T 4.0 A / 250 V; 2x (Power supply VP232-
2 for motorized stand)
Protects the integrated power supply
from excessive load
Protects the integrated power supply
from excessive load
Dust cover set M
Dust cover set L
Set of cover caps
(included in 434303-0000-000 and
434304-0000-000)
434303-0000-000
434304-0000-000
434302-0000-000
For covering the instrument when it is
not in use. For covering eyepieces
* Included in the tool kit that is supplied in the tool bag with the instrument (451892-0000-000).