Zeiss Axio Imager 2 - Page 31

Axio Imager 2 INSTRUMENT DESCRIPTION ZEISS
Technical data
01/2016 430000-7544-001 31
Operating data for coded Axio Imager 2, equipped with an integrated power supply or
motorized Axio Imager 2 using the VP232-2 external power supply
Operating environment ........................................................................................................ Closed room
Protection class .......................................................................................................................................I
Ingress protection rating .................................................................................................................. IP 20
Electrical safety ............................................................ in compliance with DIN EN 61010-1 (IEC 61010-1)
including CSA and UL directives
Overvoltage category ............................................................................................................................. II
Radio interference suppression ........................................................ in accordance with EN 55011 Class B
Noise immunity ................................................................................ in accordance with DIN EN 61326-1
Line voltage for integrated power supply ............................... 100 V to 127 V and 200 V to 240 V ±10 %
Line voltage conversion is not required!
Line voltage for external power supply VP232-2 .................................................... 100 V to 240 V ±10 %
Line frequency ................................................................................................................... 50 Hz – 60 Hz
Power consumption of coded Axio Imager ........................................................................... max. 300 VA
Power consumption of motorized Axio Imager ..................................................................... max. 190 VA
LED illuminator ................................................................................. 400 nm to 700 nm, peak at 460 nm
Attachment lamp VIS-LED ................................................................. 400 nm to 700 nm, peak at 460 nm
Ballast unit HBO 100
Operating environment ........................................................................................................ Closed room
Protection class .......................................................................................................................................I
Ingress protection rating .................................................................................................................. IP 20
Line voltage ........................................................................................................... 100 VAC ... 240 VAC
Line frequency ................................................................................................................... 50 Hz – 60 Hz
Power consumption when HBO 100 is used.................................................................................. 155 VA
Fuses in accordance with IEC 127
Axio Imager microscope stand, coded .......................................................... T 5.0 A / H / 250V, 5x20 mm
Power supply VP232-2 for Axio Imager, mot. .................................................... T 4.0 A / 250V, 5x20 mm
Ballast unit HBO 100 ................................................................................................. T 2.0 A/H, 5x20 mm
Light sources
Halogen lamp ...................................................................................................................... 12 V/100 W
Adjustment of light source .......................................................... continuous, approx. 0.7 V to 12 V
Mercury vapor short-arc lamp ............................................................................................ HBO 103 W/2
Power consumption of HBO 103 W/2 ................................................................................... 100 W