Chapter 2 Introducing the Web Configurator
EMG2306-R10A User’s Guide
17
2 Launch your web browser.
3 Type "http://192.168.1.1" as the website address.
Your computer must be in the same subnet in order to access this website address.
4 If you are logging in with the “admin” account, type “1234” (default) as the password.
If you are logging in with the “supervisor” account, type “supervisor” (default) as the password.
Then click Login.
Figure 3 Admin Account Login
The following table describes the labels in this screen.
Table 3 Login screen
LABEL DESCRIPTION
User Name Type “admin” or “supervisor” as the user name.
Note: Admin is displayed in Figure 3.
Password Type “1234” (default) as the password.
Login Click Login to enter the EMG2306-R10A’s web configurator.
To Next Page
Loading...
