IES-2000/3000 User’s Guide
7-14 ALC1024 Specific Commands
<rx vpi> = The VPI setting for the ADSL port for use with Rx based networks.
<rx vci> = The VCI setting for the ADSL port for use with Rx based networks.
The set pvcs command allows you to configure a single PVC for all of the ADSL ports at once.
The <rx vpi> and <rx vci> settings will be equal to those of <tx vpi> and <tx vci> if the rx settings are not
configured.
7.5.23 Show PVC Command
Syntax:
192.168.1.1 adsl> show pvc <port number>
where
<port number>
= A port number, from 1 to 24.
The show pvc command allows you to display the PVC parameters of an individual ADSL port.
7.5.24 Show PVCs command
Syntax:
192.168.1.1 adsl> show pvcs
The show pvcs command allows you to display the PVC parameters of all ADSL ports.
To Next Page
Loading...
