IES-2000/3000 User’s Guide
Switch-Related Commands 28-13
Table 28-5 MAC Address CI Commands
COMMAND DESCRIPTION EXAMPLE
sw mac status
Use this command to see which ports may learn MAC
addresses.
sw mac status
sw mac learn n on|off
Use this command to allow or disallow port n from learning
MAC addresses.
sw mac learn 1 on
sw mac address
Use this command to see all MAC addresses learned.
sw mac address
sw mac num
Use this command to view the total number of learned MAC
addresses.
sw mac num
sw mac find
Use this command to find a MAC address and display port
interface and age information.
sw mac find
00:80:c8:3d:35:5d
28.5.1 MAC Learning Status
sw mac status
This command displays ports that may learn MAC addresses.
Figure 28-12 MAC Learning Status
From this screen we see that all ports have MAC learning enabled by default.
For actual MAC address learning to occur on a port, Active must be set to Yes in Menu 6 — Ports
Setup for that port.
28.6 MAC Address Learning
To disallow port 1 from learning MAC addresses use this command.
sw mac learn 1 off
This command turns MAC address learning off for port 1.
sw mac status
Type this command to see the result.
vlc1012> sw mac status
Port 1 MAC learning operation : Enabled
Port 2 MAC learning operation : Enabled
Port 3 MAC learning operation : Enabled
Port 4 MAC learning operation : Enabled
Port 5 MAC learning operation : Enabled
Port 6 MAC learning operation : Enabled
Port 7 MAC learning operation : Enabled
Port 8 MAC learning operation : Enabled
Port 9 MAC learning operation : Enabled
Port 10 MAC learning operation : Enabled
Port 11 MAC learning operation : Enabled
Port 12 MAC learning operation : Enabled
Port 13 MAC learning operation : Enabled
Port 14 MAC learning operation : Enabled
CAUTION: For actual MAC address learning to occur on a port, Active must be
set to Yes in Menu 6 - Ports Setup for that port.
vlc1012>
To Next Page
Loading...
