ZyXEL Communications IES-2000 - Figure 27-4 VDSL Driver Version; Figure 27-5 VDSL Show Example

IES-2000/3000 User’s Guide
VDSL-Related Commands 27-7
27.2.8 VDSL Version Command
Syntax:
vdsl ver
Use this command to see the VDSL driver version, date it was created and VDSL patch version.
Figure 27-4 VDSL Driver Version
27.2.9 Clear VDSL Channel Status
Syntax:
vdsl clear chan-id
This command clears the status counters of the specific VDSL channel.
27.2.10 VDSL Show Command
Syntax:
vdsl show chan-id
This command displays your VDSL driver settings for the channel you specify.
Figure 27-5 VDSL Show Example
vlc1012> vdsl show vdsl01
VDSL Channel vdsl01 Setting:
VDSL Port: enable
VDSL mode: 10BaseS
VDSL Max. upstream rate: 4
VDSL Max. downstream rate: 4
VDSL Curr. upstream rate: 4
VDSL Curr. downstream rate: 4
VDSL state: 4
VDSL auto flag: off
VDSL monitor flag: off
VDSL debug flag: off
VDSL auto upgrade NT EEPROM flag: off
VDSL enet monitor flag: off
NT Ethernet Speed: Auto
NT Ethernet flow control: on
VDSL disconnect count: 0
VDSL PBO algorithm: 0
VDSL uptime: 0
vlc1012>
vlc1012> vdsl ver
vdsl driver version = 0.54
vdsl driver date = 12/04/2001
vdsl patch version = 0x50
vlc1012>