ZyXEL Communications IES-2000 - Figure 28-5 VLAN Set Example; Figure 28-6 VLAN Set Example 2

IES-2000/3000 User’s Guide
Switch-Related Commands 28-9
Note that if ports 5, 6 and 7 were already egress ports for port 1 (previous to this command), issuing sw vlan
set 1 3 4
would not affect these and they would remain port 1 egress ports.
Enter “sw vlan status” to see the result of this command.
Figure 28-5 VLAN Set Example
Port 1 can now talk to ports 3 and 4, but ports 3 and 4 cannot talk to port 1. Set port 1 to be the egress port for
each of ports 3 and 4 (using the
sw vlan set command) so that they may also talk to port 1 giving a
symmetrical table as shown in the next figure.
sw vlan set 3 1
Sets port 1 to be the egress port for port 3.
sw vlan set 4 1
Sets port 1 to be the egress port for port 4.
Figure 28-6 VLAN Set Example 2
Set All Ports to be Egress Ports for a Port
Syntax:
VLAN map:
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Port 0: O — — — — — — — — — — — — X X
Port 1: — O — X X — — — — — — — — X X
Port 2: — — O — — — — — — — — — — X X
Port 3: — X — O — — — — — — — — — X X
Port 4: — X — — O — — — — — — — — X X
Port 5: — — — — — O — — — — — — — X X
Port 6: — — — — — — O — — — — — — X X
Port 7: — — — — — — — O — — — — — X X
Port 8: — — — — — — — — O — — — — X X
Port 9: — — — — — — — — — O — — — X X
Port10: — — — — — — — — — — O — — X X
Port11: — — — — — — — — — — — O — X X
Port12: — — — — — — — — — — — — O X X
Port13: X X X X X X X X X X X X X O X
Port14: X X X X X X X X X X X X X O X
Where 'O' means the port itself, 'X' means its VLAN member, and '-' is not VLAN
member.
VLAN map:
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Port 0: O — — — — — — — — — — — — X X
Port 1: — O — X X — — — — — — — — X X
Port 2: — — O — — — — — — — — — — X X
Port 3: — — — O — — — — — — — — — X X
Port 4: — — — — O — — — — — — — — X X
Port 5: — — — — — O — — — — — — — X X
Port 6: — — — — — — O — — — — — — X X
Port 7: — — — — — — — O — — — — — X X
Port 8: — — — — — — — — O — — — — X X
Port 9: — — — — — — — — — O — — — X X
Port10: — — — — — — — — — — O — — X X
Port11: — — — — — — — — — — — O — X X
Port12: — — — — — — — — — — — — O X X
Port13: X X X X X X X X X X X X X O X
Port14: X X X X X X X X X X X X X O X
Where 'O' means the port itself, 'X' means its VLAN member, and '-' is not VLAN
member.