ZyXEL Communications IES-2000 - Figure 11-1 PVID Command Display Example

IES-2000/3000 User’s Guide
11-6 IEEE 802.1QTagged VLAN Commands
192.168.1.1 vlan1q> pvid
Figure 11-1 PVID Command Display Example
11.6.5 SVLAN CPU Command
Syntax:
192.168.1.1 vlan1q> svlan cpu [<vid>]
where
<vid> =
VLAN ID. Valid parameter range = [1 – 4094].
This command registers your CPU as a port member of the static VLAN with <vid>. To display the CPU
static VLAN identification, simply enter this command without parameters, as shown next.
192.168.1.1 vlan1q> svlan cpu
11.6.6 SVLAN List Command
Syntax:
192.168.1.1 vlan1q> svlan list
This command displays the static VLAN registration table. The following figure is an example of what is
displayed when you use this command.
pvid port#
----- -----
1 1
1 2
1 3
1 4
1 5
1 6
1 7
1 8
1 9
1 10
1 11
1 12
1 13
1 14
1 15
1 16
1 17
1 18
1 19
1 20
1 21
1 22
1 23
1 24
1 25