IES-2000/3000 User’s Guide
Switch-Related Commands 28-7
Whether to tag an outgoing frame depends on the setting of the egress port on a per VLAN, per port basis (recall
that a port can be members of multiple VID). If the tagging on the egress port is enabled for the VID of a frame,
then the frame is transmitted as a tagged frame; otherwise, it is transmitted as an untagged frame.
Figure 28-3 Forwarding Tagged/Untagged Frames to 802.1Q VLAN Aware/Unaware Devices
28.4.2 VLAN Status Command
Syntax:
sw vlan status
Use this command to view the port-based VLAN settings for all ports.
The factory default port-based VLAN for the VLC1012 is shown in the next screen.
To Next Page
Loading...
