ZyXEL Communications IES-2000 - Figure 28-9 Clear One Port of Specific Egress Ports

IES-2000/3000 User’s Guide
Switch-Related Commands 28-11
28.4.4 VLAN Clear Command
Clear One Port of Specific Egress Ports
Syntax:
sw vlan clear n x1 x2
Use this command to clear port n of egress ports x1 and x2.
Sw vlan clear 1 3 4
Clears port 1 of egress ports 3 and 4.
This command only clears the egress ports you specify.
Enter sw vlan status to see the result of this command.
Figure 28-9 Clear One Port of Specific Egress Ports
Clear One Port of All Egress Ports
Syntax:
sw vlan clear n all
Use this command to clear port n of all egress ports.
sw vlan clear 1 all
Clears port 1 of all egress ports.
Enter
sw vlan status to see the result of this command.
VLAN map:
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Port 0: O X X X X X X X X X X X X X X
Port 1: X O X — — X X X X X X X X X X
Port 2: X X O X X X X X X X X X X X X
Port 3: X X X O X X X X X X X X X X X
Port 4: X X X X O X X X X X X X X X X
Port 5: X X X X X O X X X X X X X X X
Port 6: X X X X X X O X X X X X X X X
Port 7: X X X X X X X O X X X X X X X
Port 8: X X X X X X X X O X X X X X X
Port 9: X X X X X X X X X O X X X X X
Port10: X X X X X X X X X X O X X X X
Port11: X X X X X X X X X X X O X X X
Port12: X X X X X X X X X X X X O X X
Port13: X X X X X X X X X X X X X O X
Port14: X X X X X X X X X X X X X X O
Where 'O' means the port itself, 'X' means its VLAN member, and '-' is not VLAN
member.