IES-2000/3000 User’s Guide
28-14 Switch-Related Commands
Figure 28-13 Set Port 1 To Learn MAC Addresses
28.6.1 MAC Address Details
Syntax:
sw mac address
Type this command to see details of all MAC addresses learned.
vlc1012> sw mac status
Port 1 MAC learning operation : Disabled
Port 2 MAC learning operation : Enabled
Port 3 MAC learning operation : Enabled
Port 4 MAC learning operation : Enabled
Port 5 MAC learning operation : Enabled
Port 6 MAC learning operation : Enabled
Port 7 MAC learning operation : Enabled
Port 8 MAC learning operation : Enabled
Port 9 MAC learning operation : Enabled
Port 10 MAC learning operation : Enabled
Port 11 MAC learning operation : Enabled
Port 12 MAC learning operation : Enabled
Port 13 MAC learning operation : Enabled
Port 14 MAC learning operation : Enabled
CAUTION: For actual MAC address learning to occur on a port, Active must be
set to Yes in Menu 6 - Ports Setup for that port.
vlc1012>
To Next Page
Loading...
