ZyXEL Communications IES-2000 - Commonly Used Commands

IES-2000/3000 User’s Guide
6-2 System Commands
You can issue the help or ? command at any time. The system displays a list of available commands in response.
You can issue
help with a command name to get more details about it, for instance:
192.168.1.1> help version
yields
version - show system software version
The system responds with a description of the version command.
6.2.2 Saving Your Configuration
Always remember to save your configuration using the following syntax:
192.168.1.1> config save
This command saves all system configurations into nonvolatile memory. You must use this command to save any
configurations that you make, otherwise the line card will return to its default settings when it is restarted.
Do not turn off your IES-2000/3000 while saving your configuration.
6.3 Commonly Used Commands
This section shows you commonly used commands.
6.3.1 Uptime Command
Syntax:
192.168.1.1> uptime
This command shows the elapsed time the system has been running since the last reboot.
6.3.2 Version Command
Syntax:
192.168.1.1> version
This command shows the system firmware version and date
6.3.3 Restart Command
Syntax:
192.168.1.1> restart